118Specifying the link metric type for tunnel path calculationTo specify the metric type for tunnel path calculation:Step Command Remarks1. Enter system view. system-view N/A2. Enter MPLS view. mpls N/A3. Specify the metric type to usewhen no metric type isexplicitly configured for atunnel.mpls te path metric-type { igp | te }Optional.TE metrics of links are used bydefault.4. Return to system view. quit N/A5. Enter MPLS TE tunnel interfaceview. interface tunnel tunnel-number N/A6. Specify the metric type to usefor path calculation of thecurrent tunnel.mpls te path metric-type { igp | te }Optional.If you do not configure the mpls tepath metric-type command inMPLS TE tunnel interface view, themetric type specified in MPLS viewtakes effect.7. Submit current tunnelconfiguration. mpls te commit Optional.8. Return to system view. quit N/A9. Enter interface view of MPLSTE link.interface interface-typeinterface-number N/A10. Assign a TE metric to the link. mpls te metric valueOptional.If no TE metric is assigned to thelink, IGP metric is used as the TEmetric by default.Configuring the traffic flow type of a tunnelStep Command Remarks1. Enter system view. system-view N/A2. Enter MPLS TE tunnel interfaceview. interface tunnel tunnel-number N/A3. Configure the traffic flow typeof the TE tunnel.mpls te vpn-binding { aclacl-number | vpn-instancevpn-instance-name }Optional.Traffic flow types of TE tunnels arenot restricted by default.4. Submit current tunnelconfiguration. mpls te commit N/A
