208Task Command RemarksDisplay information aboutKompella VCs.display mpls l2vpn connection[ vpn-name vpn-name [ remote-cece-id | down | up | verbose ] |summary | interface interface-typeinterface-number ] [ | { begin |exclude | include }regular-expression ]Available in any viewDisplay information about L2VPNin the BGP routing table.display bgp l2vpn { all | group[ group-name ] | peer[ [ ip-address ] verbose ] |route-distinguisher rd [ ce-id ce-id[ label-offset label-offset ] ] } [ |{ begin | exclude | include }regular-expression ]Available in any viewDisplay L2VPN information on aPE.display mpls l2vpn[ export-route-target-list |import-route-target-list |vpn-name vpn-name [ local-ce |remote-ce ] ] [ | { begin | exclude |include } regular-expression ]Available in any viewDisplay the MPLS L2VPN ACinformation.display mpls l2vpn fib ac vpws[ interface interface-typeinterface-number [ service-instanceservice-instanceid ] ] [ slotslot-number ] [ | { begin | exclude| include } regular-expression ]Available in any viewDisplay the MPLS L2VPN PWinformation.display mpls l2vpn fib pw vpws[ interface interface-typeinterface-number [ service-instanceservice-instanceid ] ] [ slotslot-number ] [ verbose ] [ | { begin| exclude | include }regular-expression ]Available in any viewDisplay information about one orall PW classes.display pw-class [ pw-class-name ][ | { begin | exclude | include }regular-expression ]Available in any viewMPLS L2VPN configuration examplesThis section provides examples for configuring MPLS L2VPN.Example for configuring a remote CCC connectionNetwork requirementsThe CEs are connected to the PEs through VLAN interfaces.Create a remote CCC connection, so CE 1 and CE 2 can exchange Layer 2 packets across the backbonenetwork.
