175Task Command RemarksDisplay information about VPLSconnections.display vpls connection [ bgp | ldp| static | vsi vsi-name ] [ block |down | up ] [ verbose ] [ | { begin| exclude | include }regular-expression ]Available in any viewDisplay the AC entry information ofone or all VPLS instances.display mpls l2vpn fib ac vpls [ vsivsi-name | interface interface-typeinterface-number [ service-instanceservice-instanceid ] ] [ slotslot-number ] [ verbose ] [ | { begin| exclude | include }regular-expression ]Available in any viewDisplay the PW entry informationof one or all VPLS instances.display mpls l2vpn fib pw vpls [ vsivsi-name [ link link-id ] ] [ slotslot-number ] [ verbose ] [ | { begin| exclude | include }regular-expression ]Available in any viewDisplay information about serviceinstances on a specified interface.display service-instance interfaceinterface-type interface-number[ service-instance instance-id ] [ |{ begin | exclude | include }regular-expression ]Available in any view.Display information about one orall VPLS instances.display vsi [ vsi-name ] [ verbose ][ | { begin | exclude | include }regular-expression ]Available in any viewDisplay information about remoteVPLS connections.display vsi remote { bgp | ldp } [ |{ begin | exclude | include }regular-expression ]Available in any viewDisplay information about one orall PW classes.display pw-class [ pw-class-name ][ | { begin | exclude | include }regular-expression ]Available in any viewClear the MAC address table ofone or all VPLS instances. reset mac-address vsi [ vsi-name ] Available in user viewVPLS configuration examplesThe following sections provide VPLS configuration examples.Binding service instances with VPLS instancesNetwork requirementsCE 1 and CE 2 are connected to PE 1 and PE 2 through VLANs.On PE 1 and PE 2, perform the following configuration:• Configure VPLS instance aaa to use LDP (Martini mode) and VPLS instance bbb to use BGP(Kompella mode), and configure the AS number as 100.
