372[ASBR-PE1-bgp] ipv6-family vpnv6[ASBR-PE1-bgp-af-vpnv6] peer 1.1.1.9 enable[ASBR-PE1-bgp-af-vpnv6] quit[ASBR-PE1-bgp] quit# Configure ASBR-PE 2.[ASBR-PE2] bgp 200[ASBR-PE2-bgp] ipv6-family vpn-instance vpn1[ASBR-PE2-bgp-ipv6-vpn1] peer 2002:1::1 as-number 100[ASBR-PE2-bgp-ipv6-vpn1] quit[ASBR-PE2-bgp] peer 4.4.4.9 as-number 200[ASBR-PE2-bgp] peer 4.4.4.9 connect-interface loopback 0[ASBR-PE2-bgp] ipv6-family vpnv6[ASBR-PE2-bgp-af-vpnv6] peer 4.4.4.9 enable[ASBR-PE2-bgp-af-vpnv6] quit[ASBR-PE2-bgp] quit# Configure PE 2.[PE2] bgp 200[PE2-bgp] peer 3.3.3.9 as-number 200[PE2-bgp] peer 3.3.3.9 connect-interface loopback 0[PE2-bgp] ipv6-family vpnv6[PE2-bgp-af-vpnv6] peer 3.3.3.9 enable[PE2-bgp-af-vpnv6] quit[PE2-bgp] quit6. Verify your configuration:After you complete the configurations, display the routing table and use the ping command. TheCEs have learned the route to each other and can ping each other.Configuring inter-AS IPv6 VPN option CNetwork requirements• Site 1 and Site 2 belong to the same VPN. Site 1 accesses the network through PE 1 in AS 100 andSite 2 accesses the network through PE 2 in AS 600.• PEs in the same AS run IS-IS.• PE 1 and ASBR-PE 1 exchange labeled IPv4 routes by MP-IBGP.• PE 2 and ASBR-PE 2 exchange labeled IPv4 routes by MP-IBGP.• PE 1 and PE 2 are MP-EBGP peers.• ASBR-PE 1 and ASBR-PE 2 use their respective routing policies and label the routes received fromeach other.• ASBR-PE 1 and ASBR-PE 2 use MP-EBGP to exchange labeled IPv4 routes.
