82Task Command RemarksDisplay information about remoteLDP peers.display mpls ldp remote-peer [ remote-nameremote-peer-name ] [ | { begin | exclude |include } regular-expression ]Available in any viewDisplay information about LDPsessions between LDP peers.display mpls ldp session [ all [ verbose ] |[ vpn-instance vpn-instance-name ] [ peer-id |verbose ] ] [ | { begin | exclude | include }regular-expression ]Available in any viewDisplay statistics information aboutall LSP sessions.display mpls ldp session all statistics [ |{ begin | exclude | include }regular-expression ]Available in any viewDisplay information about LSPsestablished by LDP.display mpls ldp lsp [ all | [ vpn-instancevpn-instance-name ] [ dest-addrmask-length ] ] [ | { begin | exclude |include } regular-expression ]Available in any viewNOTE:The vpn-instancevpn-instance-name option is used to specify information about an LDP instance. Forinformation about LDP instances, see "Configuring MPLS L3VPN."Clearing MPLS statisticsStep Command Remarks1. Clear MPLS statistics for oneor all MPLS interfaces.reset mpls statistics interface{ interface-type interface-number | all } Available in user view2. Clear MPLS statistics for allLSPs or the LSP with a specificindex or name.reset mpls statistics lsp { index | all |name lsp-name } Available in user viewMPLS configuration examplesConfiguring static LSPsNetwork requirementsSwitch A, Switch B, and Switch C support MPLS.Establish static LSPs between Switch A and Switch C so that subnets 11.1.1.0/24 and 21.1.1.0/24 canaccess each other over MPLS. Test the connectivity of the static LSPs.
