46Resetting BGP connectionsWhen BGP configuration changes, you can use the soft reset function or reset BGP connections to makenew configurations take effect. Soft reset requires that BGP peers have route refreshment capability(supporting Route-Refresh messages).Use the following commands to hard reset or soft reset BGP connections:Step Command Remarks1. Soft reset the IPv6 BGPconnections in a VPNinstance.refresh bgp ipv6 vpn-instancevpn-instance-name { ipv6-address| all | external } { export | import }Available in user view2. Hard reset the IPv6 BGPconnections of a VPNinstance.reset bgp ipv6 vpn-instancevpn-instance-name { as-number |ipv6-address | all | external }Available in user viewDisplaying information about IPv6 MCETask Command RemarksDisplay information about aspecific or all VPN instances.display ip vpn-instance [ instance-namevpn-instance-name ] [ | { begin | exclude |include } regular-expression ]Available in any viewDisplay information about the IPv6FIB of a VPN instance.display ipv6 fib vpn-instancevpn-instance-name [ acl6 acl6-number |ipv6-prefix ipv6-prefix-name ] [ | { begin |exclude | include } regular-expression ]Available in any viewDisplay a VPN instance’s FIBentries that match the specifieddestination IPv6 address.display ipv6 fib vpn-instancevpn-instance-name ipv6-address[ prefix-length ] [ | { begin | exclude |include } regular-expression ]Available in any viewDisplay information about IPv6BGP peers established between thePE and CE in a VPN instance.display bgp vpnv6 vpn-instancevpn-instance-name peer [ ipv6-addressverbose | verbose ] [ | { begin | exclude |include } regular-expression ]Available in any viewDisplay the BGP VPNv6 routinginformation of a VPN instance.display bgp vpnv6 vpn-instancevpn-instance-name routing-table[ network-address prefix-length[ longer-prefixes ] | peer ipv6-address{ advertised-routes | received-routes } ] [ |{ begin | exclude | include }regular-expression ]Available in any viewFor commands that display information about a routing table, see Layer 3—IP Routing CommandReference.
