102Expanded programsConcentration Resolution:1. Press Concentration Resolution in the "Options" menu.2. Select the resolution.3. Press OK to confirm.4. Press Return to return to the results screen.6.5.2 Complete a reading in the Multi Wavelength mode1. Insert the zero solution cell into the cell compartment.2. Press Zero.Note: The Read key does not become active until the zero readinghas been completed.3. Insert the analysis cell into the cell compartment.4. Press Read.5. For data storage, refer to section 5.3.1, page 43.6.6 Wavelength Scan mode – recording of absorbance and transmissionspectrumsIn the Wavelength Scan mode, the absorbance of the light in asolution over a defined wavelength spectrum is measured. Whilethe scan is taking place, the cell compartment cover must beclosed. Therefore, a scan of the round cell compartment is notpossible.The reading results can be displayed as a curve, as percentagetransmittance (%T) or as Absorbance (Abs). The collected datacan be printed as a table or a curve.The data is available for formatting changes. These includeautomatic scaling and zoom functions. Maximum and minimumvalues are determined and shown as a table.The cursor can be moved to any point on the curve for thepurpose of reading off the absorbance or transmittance value andthe wavelength. The data associated with each data point canalso be shown as a table.
