108Expanded programs6.7 Time course of absorbance/transmittanceThe Time Course mode is used to collect data in eitherabsorbance or transmittance for a user-specified length of time.This data can be displayed in either graphic or tabular format.While the time scan is taking place, the cell compartment covermust be closed. Therefore, a scan of the round cell compartmentis not possible.6.7.1 Time course setup parameters1. Press Time Course mode in the Main Menu.2. Press Options to configure parameters.Table 16 Time course optionsOptions DescriptionMore For further optionsFolder icon To store the scan dataTime & Interval To input the total time for data collection and the time interval between the collection of datapointsλ To input the wavelength settingView Table To display readings in absorbance, transmittance or concentration. This can be changed aftersample data is collectedScale & UnitsScale: In the automatic Scaling mode, the y-axis is automatically adjusted so that the total scanis displayed.The manual Scaling mode allows sections of the scan to be displayed.Units: Choice of absorbance or transmittance.Send Data To send Data to a printer, computer or USB memory stick (Type A)Recall measurementdata Recall saved measurement data, wave-length scans or time courses, see section 5.3, page 43.Instrument Setup Basic data of the instrument, refer to section 5.2, page 27.
