38Standard programsPrinter Setup:• Resolution: Font size• Paper: Paper sizeNote: If an optional Thermal Printer is connected, the function "AutoSend" on/off is available.4. Press Resolution to select the print quality.Select between:• 100 dpi,• 150 dpi and• 300 dpi.5. Press OK to confirm the entry.Note: Press OK again to return to the "Instrument Setup" menu.6. Press Paper to select the paper size.Select between:• Letter,• Monarch,• Executive,• A4.7. Press OK to confirm the entry.Note: Press OK again to return to the "Instrument Setup" menu.5.2.7.2 Print data1. Press Recall Data from the Main Menu.2. Select the data source, where the data to be printed arestored.A list is displayed. Data can be filtered. Refer tosection 5.3.1.2, page 44 for more information.3. Press the Printer icon to send the data (table, curve)immediately to the printer.4. Highlight Single point, Filtered data or All data and pressOK to confirm.Send data... appears on the display until the data isprinted.
