27Standard programs5.2 Instrument Setup1. Select Instrument Setup in the Main Menu.A selection of functions appears in order to configure thefunctions of the instrument.5.2.1 Operator IDUse this option to enter up to 30 sets of operator initials (up to tencharacters each) into the instrument. This feature helps recordwhich operator measured each sample.1. Press Operator ID in "Instrument Setup".2. Press Options>New to enter a new operator ID.Note: If no operator ID has yet been entered, the alphanumerickeyboard is immediately displayed.3. Use the alphanumeric keypad to enter a new operator ID.4. Press OK to confirm the entry.5. Choose an icon for the operator ID using the Left Arrow andRight Arrow.6. Press Operator Password to protect the operator ID with apassword.7. Use the alphanumeric keyboard to enter an operatorpassword.8. Press OK to confirm the entry.9. Press Cancel to delete the complete entry for the operatorID.Press Back to reach to the input screen for operator ID.Press OK to confirm the entry. The following screen isdisplayed.
