68Standard programs5.5.5.2 Manual update of a barcode testNote: Only in very few cases does the revision of a test require all testspecifications to be updated.The various data types that determine a barcode test aredescribed in Table 6.Enter the NameCheck the process specification in advance to determine whetherthis point needs to be changed.1. Highlight the line containing Name and press Edit. Use thealphanumeric keypad to enter the name indicated in theprocess specification.2. Press OK to confirm.Enter the Version1. Highlight the line containing Version and press Edit. Use thealphanumeric keypad to enter the name indicated in theprocess specification.2. Press OK to confirm.Table 6 Program update optionsProgram point DescriptionName Name of the analysis parameterVersion An abbreviation assigned by the user or the version number, etc. is entered hereMeasurement processExact definition of the test: the number of wavelengths at which readings are carried out, thenumber of absorbance readings needed, the keys to be used, any waiting periods betweenreadings, etc.Formula Definition of the evaluation formulas with which the test result is calculatedVariablesThe number of variables shown in the display depends on the definition of the measurementprocess and the formulas. Input of the numerical values of the wavelengths, factors, constants,etc.Timer 1, Timer 2,Timer 3, Timer 4This function can be used to enter abbreviations and defined times for up to four timers.Highlight the corresponding line and press Edit.The timers are activated or deactivated with the control boxes on the left of the display. In thenext column, a selection can be made from a list of names that describe the corresponding workstep. In the third column, the times for each active timer are entered.
