63Standard programsThe Data list of the corresponding test will appear.The process specification of the corresponding test containsthe new data (Wavelength, Factors, reading Ranges,Conversion Factor for chemical Form etc.).3. Highlight the corresponding line in the data overview andpress Edit.4. Press OK and then Store after editing the test.5.4.10.3 Program a new test1. Press Stored Programs in the Main Menu.2. Press Program Options and then New.3. Use the alphanumeric keypad to enter the Program Numberindicated in the working procedure.An overview of the data for the test to be programmed isdisplayed.The process specification of the corresponding test containsthe new data (Wavelength, Factors, reading Ranges,Conversion Factor for chemical Form etc.).4. Highlight the line containing the test specification that is to beprogrammed, then press Edit and enter the data in theappropriate program lines.5. Press OK and then Store after editing the test.5.4.11 Add stored programs to the favorite programs listThe "Favorites" menu simplifies test selection by creating a list ofthe most frequently used tests from the Stored Programs andUser Programs.1. Press Stored Programs in the Main Menu. The "StoredPrograms" list will appear.2. Highlight the selection by pressing it or Select by Number tosearch for the program by number.3. Press Add to Favorites and press OK to confirm.The program can now be selected from "FavoritePrograms" menu in the Main Menu.
