6. Press ↓ until the message SEQUENCE=xxxxxx displays, where xxxxxx can be NONE,FR+RR ASF1+2, ASF123. If you want to select a value other than the onedisplayed, press ← or →.7. To exit from Power On Configuration, press Menu/Enter. Your new value isstored in NVM.AlarmThe audible alarm will sound after you interrupt aready condition. You can stop thealarm after it begins sounding by pressing a key.You can set the audible alarm by selecting one of the following values:Yes (default) Alarm will sound.No Alarm will not sound.To change or check the Alarm control value:1. Ensure the printer is powered off (O).2. Press and hold Menu/Enter while powering on (|) the printer. The messageSTARTING UP displays.3. After start-up is complete, release Menu/Enter and the message PRINT OUT=NOdisplays.4. Press ↓ until the message FUNCTIONS displays.5. Press → until the message FRONT TEAR=xxxx displays, where xxxx can be NORM,AUTO, or NO.6. Press ↓ until the message ALARM=xxx displays, where xxx can be YES or NO. Ifyou want to select a value other than the one displayed, press ← or →.7. To exit from Power On Configuration, press Menu/Enter. Your new value isstored in NVM.Automatic LoadThis parameter is available only for Manual Sheet Feed. You can set automatic loadto one of the following values:Yes (default) Enables the quick printing function. This means that a single sheetform will be loaded automatically when inserted into the printer.No Disables the quick printing function. This means that a single sheetform will not be loaded automatically when inserted into the printer.To load the form, press Load/Form Feed.To change or check the Automatic Load value:1. Ensure the printer is powered off (O).2. Press and hold Menu/Enter while powering on (|) the printer. The messageSTARTING UP displays.3. After start-up is complete, release Menu/Enter and the message PRINT OUT=NOdisplays.4. Press ↓ until the message FUNCTIONS displays.5. Press → until the message FRONT TEAR=xxxx displays, where xxxx can be NORM,AUTO, or NO.6. Press ↓ until the message AUTOLOAD=xxx displays, where xxx can be YES or NO. Ifyou want to select a value other than the one displayed, press ← or →.102 4247 Printer Model A00 User’s Guide
