the Power On Configuration menu, if the emulation mode is set to 4202 III XL, theChange Font control code selects fonts compatible with the 4202 Proprinter III XL. Ifthe emulation mode is set to 2381 or Native 4247, Change Font selects the fontscompatible with the 2381 Personal Printer.Supported local font identifiers are shown in the following table.Local FontIdentifier(Hex)Native 4247 and 2381 EmulationMode 4202 III XL00 Default (op. panel selection) DP01 DP DP02 DP Text DP Text03 NLQ (Courier/Gothic) NLQ (Courier/Gothic)04 DP Text Proportional DP (Download)05 NLQ Proportional (Courier/Gothic) DP (Download)06 DP DP Text (Download)07 Reserved NLQ (Download)08-0F Reserved Reserved10 OCR-A Reserved11 OCR-B Reserved12-5F Reserved Reserved60 Reserved Default (operator panel selection)61 Reserved DP (Gothic)62 Reserved NLQ Proportional (Courier/Gothic)63 Reserved OCR-A64 Reserved OCR-B65 Reserved DP66-FF Reserved ReservedNotes:1. If a downloaded font has not been previously downloaded with a Character FontImage Download control (CFID), a Change Font control to select a downloadedfont is ignored.2. The NLQ font style is selected as defined in the Power On Configuration menu:NLQ=GOTHIC or NLQ=COURIER.Relative Move Baseline (ESC J)1B 4A NNThis control performs a vertical move relative to the current print position.NN is a one-byte hexadecimal value that specifies the move amount in units of1/216 inch. The printer will adjust the value to the nearest 1/144 inch. If AutomaticCarriage Return on Line Feed is set in the operator panel Power On Configurationmenu, a carriage return also is performed when a Relative Move Baseline code isreceived (see “Carriage Return (CR)” on page 190).202 4247 Printer Model A00 User’s Guide
