2. For additional information on stacking, see “Setting Up Manual Sheet FeedPath” on page 30 or “Chapter 3. Setting Up Another Forms Path” on page 39,depending on your forms path.Environmental RequirementsThe printer operates best in business offices.Attention: To prevent printer damage, do not power on (|) the printer immediatelyafter the printer has been moved from an environment that does not meet thefollowing operating requirements. Introduce the printer to the new operatingenvironment at least 24 hours before you power it on (|).Operating EnvironmentThe following tables show the operating environment requirements for the printer.Variable Range or ValueTemperature 10° to 40° C (50° to 104°F) 16° to 32° C (60° to 90°F) withASFRelative humidity 8% to 80%Maximum wet bulbtemperature26.7°C (80.0°F) 22.8°C (73.0°F) with ASFNote: The best conditions for feeding and stacking are within a temperature rangeof 15.6° to 32.2°C (60° to 90°F) and a relative humidity range of 26% to62%.Nonoperating EnvironmentThe following tables show the non-operating environment requirements for theprinter.Variable Range or ValueTemperature 10° to 51°C (50° to 125°F) 10° to 43°C (50° to 109°F) withASFRelative humidity 8% to 80%Maximum wet bulbtemperature26.7°C (80°F) 27.0°C (80.6°F) with ASFShipping EnvironmentThe following table shows the shipping environment requirements for the printer.Variable Range or ValueTemperature -40° to 60°C (-40° to 140°F)Relative humidity 5% to 100% (including condensation, excluding rain)Maximum wet bulbtemperature30°C (86°F)Note: The printer must be covered in plastic.160 4247 Printer Model A00 User’s Guide
