Installing Wire Forms GuideThe wire forms guide helps direct the forms for stacking in the Front Push and RearPush forms paths.1. Open the acoustic cover and tilt it all the way back until it lays flat on the topcover.2. Insert one end of the wire forms guide into the hole on the right hinge block ofthe acoustic cover. See orientation in Figure 1.3. Insert the other end of the wire forms guide into the hole on the left hinge blockof the acoustic cover.4. Close the acoustic cover.Locating Operator Accessible Areas and ControlsAs with many IBM printers, a part that is colored blue or has a blue decal on it is foryour use in operating the printer. These blue marks indicate tabs and levers thatcontrol settings and changes for the machine.x x x x xx x x x xx x x x xx x x x xx x x xx x x xx x x xx x x xx x x x xx x x x x xx x x xx x x x xx x x x xx x x x xx x x x xx x x x x x x x xx x x x x x x xx x x x x x x xxxFigure 1. Installing Wire Forms GuideChapter 1. Printer Setup 5
