Ensure the correct settings are made for the Rear Pull forms path. Refer to thetables in “Summarizing Forms Path Set Up” on page 39.Additionally, you will need to perform the following tasks:1. “Installing Rear Pull Tractor”2. “Configuring Forms Path for Rear Pull” on page 633. “Loading Forms For Rear Pull” on page 64Installing Rear Pull TractorInstall the forms tractor in the Rear Pull forms path as follows (see Figure 38):1. Power off (O) the printer.2. Open the top cover and the forms guide.3. Stand facing the front of the printer. Hold the forms tractor with the tractor doorstoward you and the electrical connector tab on the left.Figure 38. Rear Pull Forms PathChapter 3. Setting Up Another Forms Path 61
