SESE specifies the emulation mode. The possible values for SE are:Hex Decimal Emulation Mode01 Epson FX 105002 2 4202 Proprinter III XL05 5 Native 4247 or 2381Select AFTA in ColumnThis command selects the column at 10 CPI where Automatic Forms ThicknessAdjustment (AFTA) will be made.ASCII DC4 DC4 ESC Z AAHEX 14 14 1B 5A AADECIMAL 20 20 27 90 AAAAThe value for AA is the column number. This value should not exceed themaximum number of columns in the line.Select/Deselect ASF BinThis command selects the ASF bin to feed a new form or deselects (disables) theprinter after ejecting a printed form.Note: This command must start and finish with a carriage return, line feed, or both;otherwise, it will be handled as if it were printable data.ASCII / / BN / /HEX 2F 2F BN 2F 2FDECIMAL 47 47 BN 47 47BN specifies the ASF bin number to feed a new form, or BN is used to disableprinting after ejecting a printed form. The possible values for BN are:ASCII Hex Decimal Result1 31 49 Feed new form, ASF bin 12 32 50 Feed new form, ASF bin 23 33 51 Feed new form, ASF bin 3C 43 67 Feed new form, ASF bin 1; then forms from ASFbin 2R 52 82 Disable printer to print after ejecting printed formAppendix C. Native 4247 Commands 181
