4. Close the forms guide and the top cover.5. Reinstall the black protective cap on the electrical connector if you are notinstalling this forms tractor into the printer. Store the forms tractor.Preparing Printer for Selected Forms PathYou must perform the following procedures for the forms path you have chosen:1. “Setting Forms Guide Deflector”2. “Setting Push-Pull Selector” on page 463. “Removing or Installing Paper Bail” on page 474. “Setting Forms Tractors” on page 50Setting Forms Guide DeflectorSee Table 7 for the correct setting for your selected forms path.Table 7. Setting the Forms Guide DeflectorFront Pushwith ManualRear Pushwith ManualDual Pushwith Manual Rear Pull Push PullForms GuideDeflector Open Open Open Closed ClosedSet the forms guide deflector as follows:1. Press Online to take the printer offline.2. Open the top cover and the forms guide (see Figure 21 on page 45).44 4247 Printer Model A00 User’s Guide
