v 2 to 136 (at 10 CPI and Prop)v 2 to 163 (at 12 CPI)v 2 to 204 (at 15 CPI)v 2 to 233 (at 17.1 CPI)v 2 to 272 (at 20 CPI)To change or check the Right Margin:1. Press Menu/Enter. The message PRINT OUT=NO displays.2. Press ↓ until the message FORM SETTING displays.3. Press → until the message LINE SP=xxxxxxx displays, where xxxxxxx can be 6LPI, 8 LPI, 12 LPI, 3L/30MM, 4L/30MM, 6L/30MM, 8L/30MM, or 12L/30MM.4. Press ↓ until the message RIGHT MARGIN=xxx displays, where xxx can be a valuefrom 2 to 272 depending on your character-per-inch setting. If you want to selecta value other than the one displayed, press ← or →.5. To exit from Program Configuration, press ↓ until the message STORE=QUITdisplays. If you want to exit without saving the new value, press Menu/Enter.If you want to save the new value, press ← or → to select either STORE=SAVE (newvalue is stored in NVM) or STORE=CURRENT (new value remains valid until theprinter is powered off (O)). Press Menu/Enter to save the new value.Slashed ZeroYou can set this value to:No (default) All printed zeros will appear without a slash through them.Yes All printed zeros will appear with a slash through them.To change or check the Slashed Zero:1. Press Menu/Enter. The message PRINT OUT=NO displays.2. Press ↓ until the message FORM SETTING displays.3. Press → until the message LINE SP=xxxxxxx displays, where xxxxxxx can be 6LPI, 8 LPI, 12 LPI, 3L/30MM, 4L/30MM, 6L/30MM, 8L/30MM, or 12L/30MM.4. Press ↓ until the message SLASH ZERO=xxx displays, where xxx can be NO orYES. If you want to select a value other than the one displayed, press ← or →.5. To exit from Program Configuration, press ↓ until the message STORE=QUITdisplays. If you want to exit without saving the new value, press Menu/Enter.If you want to save the new value, press ← or → to select either STORE=SAVE (newvalue is stored in NVM) or STORE=CURRENT (new value remains valid until theprinter is powered off (O)). Press Menu/Enter to save the new value.Restore Manufacturing DefaultsYou can set this value to:No (default) Save the new values of the selected forms path.Yes Return to the manufacturing default values of the selected formspath.To change or check the Manufacturing Default values:1. Press Menu/Enter. The message PRINT OUT=NO displays.2. Press ↓ until the message FORM SETTING displays.118 4247 Printer Model A00 User’s Guide
