1009 MEMORY/CALL CHANNELSContents of programmed memories can be cleared (erased),if desired.qPush and hold [S.MW](M/CALL) for 1 sec. to enter selectmemory write mode.• 1 short and 1 long beeps sound.• Memory channel number blinks.• Do not hold [S.MW](M/CALL) for more than 2 sec. otherwise thememory contents will be copied to VFO.wRotate [DIAL] to select the desired memory channel to becleared.e Push [∫](2) or [√](8) to select “CLEAR.”r Push and hold [S.MW](M/CALL) for 1 sec. to clear the con-tents.• 3 beeps sound.• The cleared channel changes to blank channel• Return to select memory write mode.— Memory channel num-ber blinks. Push [V/MHz] to exit select memory write mode.NOTE: Be careful!— the contents of cleared memoriesCANNOT be recalled.[DIAL]VFO mode Enter select memory write mode.to select the desired channel.RotatePush and hold for 1 sec.Channel 14PushPushto select “CLEAR.”orPush and hold for 1 sec to clear.[EXAMPLE]: Clearing memory channel 14.to return to the VFO mode.N Memory clearing
