627 DV MODE OPERATIOND Calling CQ in the same area (Area CQ)qSet the desired repeater’s frequency, offset and shift direc-tion (pgs. 23, 32), then select the DV mode (p. 25).Your own call sign (step w) and station call sign (step e)can also be set as same as repeater call signs in currentcall sign mode (step r).wSet the current call sign to your own call sign.• See pgs. 47, 48 for current call sign setting details.eSet the current station call sign as follows:± Push and hold [UR](.) for 1 sec. to enter UR call signselection mode.• Push [BAND] several times to select “GRP CQ,” then “CQC-QCQ” is selected automatically. Push [UR](.) again.r Set the current repeater’s call sign as follows:zPush and hold [CS](9) for 1 sec. to enter the current callsign mode.• UR call sign is displayed.• Push and hold [CS](9) for 1 sec. to toggle the call sign andrepeater name indications.xRotate [DIAL] to select “R1,” access repeater’s call sign,then push [ ](5) to enter the current call sign selectionmode.c Rotate [DIAL] to select the desired access repeat-er’s call sign, then push [ ](5) to set the call sign for“RPT1.”• Return to the current call sign mode.v Rotate [DIAL] to select “R2,” linked repeater’s call sign, thenpush [ ](5) to set the current call sign selection mode.• “RPT2” call sign screen is displayed.b Rotate [DIAL] to select “NOT USE,” then push [ ](5).• Return to the current call sign mode.n Push [V/MHz] to return to the frequency screen.t Push [PTT] to transmit; release to receive.• “CQCQCQ” is displayed and scrolled in sequence on the fre-quency display depending on “TX CS” setting (p. 135).• Current call sign setting exampleMy call sign JA3YUACQAreaZoneRepeater q JP3YHLUR MYR1 R2: (NOT USE)q w e rPushing [BAND] selects the repeater group when selection.N Repeater operation in the VFO
