N Transmit power selectionThe transceiver has four output power levels to suit your op-erating requirements. S-Low output power during short-rangecommunications may reduce the possibility of interference toother stations and will conserve battery power.± Push and hold [LOW](3) for 1 sec. to toggle the trans-mit output power between High (5W*), Mid (2.5 W*),Low (0.5 W*) and S-Low (0.1 W*). *approx.• While pushing and holding [LOW](3), rotate [DIAL] is also avail-able to select transmit power.[DIAL]AppearsONLY S-Lowpower operationis available whileusing BP-216.S-Low power transmissionLow power transmissionMid. power transmissionHigh power transmissionN TV channel operationTV channel operation is available only when TV channels areprogrammed using the CS-80/880 (free download software).(p. 163)D TV channel receivingq Push [M/CALL] several times to select TV channels.• “ TV” and channel number appear.w Rotate [DIAL] to select the desired channel.• While pushing and holding [BAND], rotating [DIAL] selects theall channels including skip channel.[DIAL] TV mode indicationChannel indicationTV reception isavailable for analog TVbroadcasting only, but itis not available fordigital TV bradcasting.274BASIC OPERATION12345678910111213141516171819
