11512MENU SCREEN OPERATION12345678910111213141516171819N GeneralMENU screen is used for programming infrequently changedvalues or conditions of functions.D Entering MENU screen and operation[Example]: Set “KEY B (Key-touch beep)” to OFF.q Push [MENU ] to enter MENU screen.• “DUP.T,” “SCAN,” “SET,” “DV SET,” “CALL-S,” “RX CAL,” “MES-SAG,” “RPT-L” or “GPS” appears.wPush [](2) or [](8) (or rotate [DIAL]) to select the de-sired menu group, then push [ ](5) (or [](6)).e When “SET” is selected, push [](2) or [](8) (or rotate[DIAL]) to select the desired function group, then push[ ](5) (or [](6)).r Push [](2) or [](8) to select the desired item, then push[ ](5) (or [](6)).t Push [](2) or [](8) (or rotate [DIAL]) to select the de-sired value or condition, then push [ ](5) (or [](4)) toreturn to the setting item selection mode.y Push [MENU ] (or [V/MHz]) to return to the frequencyscreen, repeat steps w to r to set another items.[DIAL]Enter menu screenPush to select “SET.”Push . Push .[EXAMPLE]: Set “KEY B (Key-touch beep)” to OFF.Push .Push .Push to select “KEY B.” Push to select “OFF,” then push .Push to select “SOUNDS.”
