1019MEMORY/CALL CHANNELS12345678910111213141516171819N Erasing/transferring bank contentsThe bank contents of programmed memory channels can becleared or reassigned to another memory bank.INFORMATION: Even if the memory bank contents arecleared, the memory channel contents still remainprogrammed.qSelect the desired bank contents to be transferred orerased from the bank. (p. 96)± Push [BAND] to enter memory bank selection state.± Rotate [DIAL] to select the desired memory bank group,then push [BAND].± Rotate [DIAL] to select the bank channel.[DIAL]wPush [S.MW](M/CALL) for 1 sec. to enter select memorywrite mode.• 1 short and 1 long beeps sound.• Displays the original memory channel number automatically, andthen “ ” indication and memory channel number blink.• Do not hold [S.MW](M/CALL) for more than 2 sec., otherwisethe memory contents will be copied to VFO.e Push [](2) or [](8) several times to select “BANK.”r Push [](6) to select the bank channels selection or push[](4) to select the bank group selection to be trans-ferred.t Rotate [DIAL] to select the desired bank group or channel.• Select “– – – –” indication when erasing the contents from thebank.[DIAL] To transfer the bank contentsto ch 11 in Bank B.To eraseBank channel is displayed.is displayed.y Push [S.MW](M/CALL) for 1 sec. to erase/transfer the bankcontents.
