858GPS/GPS-A OPERATION12345678910111213141516171819D GPS alarm settingGPS alarm sounds when your own position is close the spec-ified position. This function can be set to use information fromthe received channel, a specified GPS memory channel or allGPS memory channels.q Enter “ALM-CH” in GPS mode. MENU ¶ GPS ¶ ALM-CH(Push [MENU ]), (Push [](2)/[](8), then push [ ](5).)• Alarm setting screen is displayed.w Push [](2) or [](8) to select “RX,” “CH,” “ALL” or “OFF.”• “RX”, “ALL”, one of the memory channel can be selected.• Skip next step e when RX, ALL or OFF is selected.Alarm mark appers.e Push [ ](5), then push [](2) or [](8) to select the de-sired memory channel.• Memory name or channel number appears when the channelis selected.Alarm mark appers.r Push [ ](5) to set the alarm function and return to ALM-CH (GPS memory) screen.t Push [MENU ] to return to the frequency screen. For your information!• When “ALL” or memory channel is selected in step w, thealarm function depends on “ALM1” setting in GPS mode(p. 88).• When “RX” or “CH” is selected in step w, the alarm functiondepends on “ALM2” setting in GPS mode (p. 89).
