D Call sign edit record (EDIT R)Selects call sign programming when the call sign is edited.• OFF : The edited or corrected call sign overwritesthe pre-programmed channel. A differentchannel cannot be selected.• SEL : The edited or corrected call sign is pro-grammed into the selected call sign memory.• AUTO : The edited or corrected call sign is pro-grammed into a blank channel automatically.(default)D Auto gateway setting (GW SET)Turn the gateway auto set function ON or OFF for calling aspecific station in the DR mode. This function enables thetransceiver to set the pre-programmed gateway repeater asthe linked repeater “RPT2” automatically.• OFF : After selecting a specific station, the trans-ceiver sets the same RPT2 as previous time.(default)• AUTO : After selecting a specific station, the trans-ceiver sets the pre-programmed gateway re-peater as RPT2 automatically.D RX call sign display (RX CS)When a call is received, the calling station call sign can bedisplayed automatically. (default: AUTO)13412 MENU SCREEN OPERATION
