15113OTHER FUNCTIONS12345678910111213141516171819N Digital squelchq Set the desired operating frequency on DV mode, Digitalcode and “MY” (MY CALL SIGN).w Push and hold [DSQ](7) for 1 sec. several times to acti-vate the digital call sign or digital code squelch.• Digital call sign beep “DSQLS,” Digital call sign squelch“DSQL,” Digital code beep “CSQLS,” Digital code squelch“CSQL,” and no digital squelch operation are activated in order.• Rotating [DIAL] while pushing [DSQ](7) also selects the digitalsquelch functions.e Operate the transceiver in the normal way.r When the received signal includes a matching call sign/code, the squelch opens and the signal can be heard.• When the received signal’s call sign/code does not match, digi-tal call sign/digital code squelch does not open, however, theS-indicator shows signal strength.• To open the squelch manually, push and hold [SQL].Digital call sign squelchDigital call sign pocket beepDigital code pocket beep Digital code squelchN Pocket beep functionq Set the desired operating frequency.w Set the desired CTCSS tone, DTCS code, Digital call signor Digital code.e Push and hold [TONE](7) or [DSQ](7) for 1 sec. severaltimes to activate the pocket beep, DTCS beep, Dig-ital call sign beep or Digital code beep. (“ST SQL,”“SDTCS,” “SD SQL” or “SCSQL”)• Rotating [DIAL] while pushing [TONE](7)/[DSQ](7) also selectsthe tone squelch or digital squelch functions.r When a signal with the correct tone, code, digital call signor digital code is received, the transceiver emits beeptones for 30 sec. and blinks “S.”t Push [PTT] to answer or push [SQL] to stop the beepsand blinking.Pocket beepDigital call sign pocket beep Digital code pocket beepDTCS beep
