JBL CINEMA VISION CVPD50 Owner's Manual

Also see for CINEMA VISION CVR700: Quick start guide Service manual

Contents

112Outputs:Composite (CVBS) Video: Rear Panel: 2S-Video (Y/C): Rear Panel: 2Component (Y/Pb/Pr or YUV): Rear Panel: 1 (Monitor Out)Analog Audio L/R: Rear Panel: 2Digital Audio Coaxial: Rear Panel: 1Digital Audio Optical: Front Panel: 1, Rear Panel: 1Headphone: Front Panel: 1LFE/Subwoofer: Rear Panel: 1Speaker Level Outputs: 7 pairs (Rear Panel)IR: Rear Panel: 1Audio Section:Amplifier Type Advanced PWMTwo Channel Stereo Mode: 100 Watts per channel continuous RMS power into CVSAT50 speakers,90Hz to 20kHz, @<0.15%Five and Seven Channel Cinema Modes: 100 Watts per channel continuous RMS power into CVSAT50 and CVCEN50 speakers,90Hz to 20kHz, @<0.15%Input Sensitivity/Impedance: 200mV/47k ohmsSignal-to-Noise Ratio: 97dBAFM Tuner Section:Frequency Range: 87.5 – 108MHzUsable Sensitivity: IHF 1.3μV/13.2dBfSignal-to-Noise Ratio (Mono/Stereo): 70/68dBDistortion (Mono/Stereo): 0.2/0.3%Stereo Separation: 40dB @ 1kHzSelectivity: +/–400kHz, 70dBImage Rejection: 80dBIF Rejection: 90dBAM Tuner Section:Frequency Range: 520–1720kHzSignal-to-Noise Ratio: 45dBUsable Sensitivity: Loop 500μVDistortion: 1kHz, 50% modulation, 0.8%Selectivity: +/–10kHz, 30dBVideo Section:Television Format: NTSCInput Level/Impedance: 1V p-p/75 ohmsOutput Level/Impedance: 1V p-p/75 ohmsVideo Frequency Response:Composite and S-video: 10Hz – 8MHz (–3dB)Component video: 10Hz – 100MHz (–3dB)General:Power requirement: 120V AC, 60HzPower Consumption: 320W maximum, 78W idle, 10W standbyDimensions (W x H x D): 17-3/8" x 6-3/5" x 17-3/4" (441mm x 168mm x 451mm)Net Weight: 24 lb (11kg)