JBL CINEMA VISION CVPD50 Owner's Manual

Also see for CINEMA VISION CVR700: Quick start guide Service manual

Contents

88• Extensive use of the programming,learning and configuration functions ofthe remote may consume significantlymore battery power than normal remoteoperation. While the batteries shouldlast for four to six months in normaloperation, you may find that they needto be changed sooner after the remoteis programmed for the first time.• When the batteries approach a levelbelow which the remote will not func-tion, the remote’s LCD screen will dis-play a LOW BATTERY warning asshown in Figure 118. We strongly rec-ommend replacing the batteries assoon as this message appears to avoidthe loss of programming and configura-tion settings. These settings are notlost when the batteries are changedquickly.Figure 118• The remote has a built-in backlight thatmay be activated by pressing the LightButton W. This button is made froma special “glow” material so that it iseasier to find in dark rooms. This glowfeature does not consume any electric-ity, but the glow will fade when theremote is kept in a dark location for anextended period of time. The “glow”feature may be restored by placing theremote in normal room light for a fewhours.• The remote’s backlight will remain litfor approximately 5 seconds after theLight Button W is pressed, and itwill stay lit for another 5 seconds ifany key is pressed while the backlightis on. You may keep the backlight lit byholding the Light button, but extensiveuse of the backlight will reduce batterylife.• The LCD display will remain on for 10seconds after a key is pressed andthen turn off to conserve battery life.• When any button is held for more than30 seconds, the LCD will turn off andthe remote will stop transmitting thecodes to conserve battery life.Programmed Device FunctionsOnce the CVR700R2 remote has beenprogrammed for the codes of otherdevices, press the appropriate InputSelector 345 to switch theremote to control the audio section of theCVR700 (System Selector 5), theCVPD50 screen (Screen Selector 4),the internal DVD/CD changer of theCVR700 (DVD Selector 3) or to con-trol additional products. When you pressany one of the selectors, its name willappear on the upper line of the LCDInformation Display 2 to indicatethat you have changed the device beingcontrolled.When operating a device other than theCVR700 or CVPD50, the controls may notcorrespond exactly to the function printedon the remote or button. Some com-mands, such as the volume control, arethe same as they are with the CVR700.Other buttons will change their functionso that they correspond to a secondarylabel on the remote. For example, theSlow Play controls also function as theChannel Up and Channel Down controlswhen operating most TV sets, VCRs orcable boxes. The Channel Up/Downindication is printed directly on theremote. For many standard CD players,cassette decks, VCRs and DVD functions,the standard function icons are printedon top of the buttons. For some products,however, the function of a particular but-ton does not follow the command printedon the remote. Even though the name ofthe function will appear on the lower lineof the LCD Information Display 2when the button is pressed, in order toconveniently see which function a buttoncontrols before you press it, consult theFunction List tables on pages 89–91.To use those tables, first check the typeof device being controlled (e.g., TV, VCR).Next, look at the remote control diagramin Figure 119. Note that each button hasa number on it. To find out what functiona particular button has for a specificdevice, find the button number on theFunction List and then look in the columnfor the device you are controlling. Forexample, button number 37 is the Zoombutton for the CVR700’s internal DVDchanger, but it is the Memory button forthe tuner; the +100 button for many TVs,VCRs, HDTV tuners and PVRs, and theEnter button for many video game con-soles and D-VHS players.NOTE: The numbers used to describe thebutton functions in Figure 119 for the pur-poses of describing how a button oper-ates are a different set of numbers thanthose used in the rest of this manual todescribe the button functions for themain remote.D V D / M A I NL O W B A T T E R Y14951061171281314182226303438394345485250 514241404447 4953 5455 56 575964 656061667067716872697377767574626358461519232731351620242832361721252933372 3Figure 119