Jenn-Air JDS9865 Use And Care Manual

Also see for JDS9860: Use & care guide Use & care guide User guide User guide

Contents

10ELECTRONIC OVEN CONTROLJDS9860 and JDS9865Electronic Control PadsWhen pressing any control pad function on the Electronic OvenControl, use the pad of your finger to press the desired function.Hold down the pad a few seconds, or until the desired functionappears in the display.Oven DisplayWhen power is supplied to the range or after a powerinterruption, “12:00” and “POWER LOSS” will be displayed.Press CANCEL to clear “POWER LOSS.”When the oven is in use, the display shows the time of day,temperature, and oven setting.When the oven is not in use, the display shows the time of day.When using the Timer, for settings of 1 to 59 minutes, the displaywill count down in minutes and seconds. For settings of 1 hour ormore, the display will count down hours and minutes.Quickset PadsQuickset pads are located on each side of the display windowand are used to select the desired function or option in thedisplay window. To select the option or function, press theQuickset pad next to the word.If you need to back out of a function or option in the display,press the BACK pad. When your programming is complete, pressthe ENTER pad or wait 4 seconds and the function will startautomatically.Up arrows indicate additional screens with additional options.Press the QUICKSET pads next to the arrows to scroll throughthe display.IMPORTANT: Four seconds after entering the function, option,number or letter, the function will automatically be entered. Ifmore than 30 seconds elapse between steps in programming,the function will be canceled and the display will return to theprevious display.CancelThe CANCEL button stops any function except the Clock, Timerand Control Lock. When you press the CANCEL button, thedisplay will show the time of day, or the time remaining if theTIMER is being used.ClockTo Set Clock:1. Press SETUP.2. Select CLOCK using the left Quickset pad.3. Select TIME using the left Quickset pad.4. Enter the time using the number pads.5. Press ENTER on the number pads.6. Select AM or PM in 12-hour mode. (For 24-hour clock, seefollowing.)7. To exit the Setup mode, press SETUP.Entering the Day of the Week:1. Press SETUP.2. Select CLOCK using the left Quickset pad.3. Press the right Quickset pad to scroll until DAY is displayed.4. Select DAY using the left Quickset pad.5. Use right Quickset pad to scroll through the days.6. Select the day desired using the left Quickset pad.7. To exit the Setup mode, press SETUP.To Set the Clock for a 12- or 24-Hour Format:The clock can be set to display time in either a 12-hour or24-hour format.1. Press SETUP.2. Select CLOCK using the left Quickset pad.3. Use right Quickset pad to scroll to 12/24 HOUR.4. Press the left Quickset pad to select 12/24 HOUR.5. Select 12 HR or 24 HR using the right or left Quickset pad.6. To exit Setup mode, press SETUP.A. BakeB. FavoritesC. SetupD. Timer 1E. DisplayF. Timer 2G. Number padsH. BroilI. ConvectJ. Rapid preheatK. More optionsL. CleanM. Quickset padsN. Vent fanO. Oven lightP. CancelQ. LockBA B C DEFGMPONMLKJHIQ