24Removal of Gas ApplianceGas appliance connectors used to connect this appliance tothe gas supply are not designed for continuous movement.Once installed, DO NOT repeatedly move this gas appliancefor cleaning or to relocate. If this appliance has to be movedand/or removed for servicing, follow the procedure describedin the installation instructions. For information, contact Jenn-Air Customer Service at 1-800-JENNAIR (1-800-536-6247).To prevent range from accidentally tipping, range must besecured to the floor by sliding rear leveling leg into the anti-tip bracket.MAINTENANCELeveling LegsANTI-TIP BRACKETLEVELING LEGLEVELING LEGCAUTIONBe sure the anti-tip bracket secures one of the rearleveling legs to the floor. This bracket prevents the rangefrom accidentally tipping.The range should be leveled when installed. Ifthe range is not level, turn the plastic levelinglegs, located at each corner of the range, untilrange is level.ANTI-TIP BRACKETConvenience Outlet(Canadian models only)The convenience outlet is located on the lower left side of thebackguard. Be sure appliance cords do not rest on or near thesurface element. If the surface element is turned on, the cordand outlet will be damaged.The convenience outlet circuit breakermay trip if the small appliance pluggedinto it exceeds 10 amps. To reset thecircuit breaker, press the switchlocated on the lower edge of thebackguard.CIRCUIT BREAKER