Kenwood TM-251A Instruction Manual

Also see for TM-251A: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

VFOMODESELECTINGFREQUENCIES |The VFO mode allows you to select operatingfrequencies by using the Tuning control or themicrophone as explained under “SELECTING Using the Tuning control is convenient when you are —FREQUENCIES" below. within easy reach of the transceiver Front Panel, andthe frequencies to be selected lie near the currentRiGbe (VFO }to selecrV RO imde: frequency. The "fuzzy logic" design temporarily« The currently selected frequency appears. increases the frequency step size as the Tuningcontrol is turned more rapidly.VFO modemustbe selectedwhenusingthe followingLOEessIVE OlitorsclectVEOmace:functions:2Select your desiredband bypressing[F],[REV].m= Tuning Controle lf already in VFO mode, there is no change.3 Turn the Tuning control to select a receiveSelectVFOSelectVFOfrequency.5 to use: : —mode: tose made e Clockwise rotation increases the frequency onefrequency step at a time.Programmable ProgrammableBand Scan Limit VFO Limit e Counterclockwise rotation decreases theSelectSelectfrequencyonefrequencystepata time.If you cannot select a particular receive frequency, thefrequency step size needs to be changed. See“FREQUENCY STEP SIZE" {page 35} for furtherinformation.Note: Frequencies can also be selected via the microphonekeypad. See “KEYPAD DIRECT ENTRY" {page 71}.32