Kenwood TM-251A Instruction Manual

Also see for TM-251A: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

40Turn the Tuning control, or press microphone [UP]or [DWN], to select the desired memory channel.Press [MR].e The selected frequency and associated data arestored in the memory channel. A transmitfrequency from a split memory channel or splitCall channel is not stored.e lf the memory channel selected in the previousstep already contained data, the new dataoverwrites the previous data.e The previous mode is restored.m Split Memory Channels1oOoSelect the desired receive frequency andassociated data (Tone, CTCSS, DTSS, etc.) usingVFO mode, Memory Recall or the Call channel.Press [F] to select Memory Storage. |e “F" and a memory channel number appear.Turn the Tuning control, or press microphone [UP]or [DWN], to select the desired memory channel,Press [MR](1 s).,;© "—+" appears. ||:Turn the Tuning control, or press microphone [UPor [DWN], to select the desired transmit frequencyPress [MR].memory channel, and the previous mode isrestored.e The selected transmit frequency is stored in 7e Associated data selected in Step 1 such as Tonstatus/frequency, the frequency step, and DTS§status/code are not altered by this step.However, Transmit Offset status and Reverse —status are erased.|;;