Kenwood TM-251A Instruction Manual

Also see for TM-251A: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

DISPLAY MODEWhile using Tone/CTCSS, DTSS or Page, there areseveral options available for how information appears onthe Main Display and the smaller Sub-display. Reviewthe following chart to decide the arrangement you prefer,then select your choice from Menu A.Menu ASelectionMain Display Sub-display¢ Operating frequencySub 1 ¢ Operating frequency | * Tone/CTCSSfrequency or«DTSS code or«Page codeSub 2 |* Tone/CTCSS ¢ Operatingfrequency or«DTSS code or* Page codefrequency’"If Tone/CTCSS, DTSS, and Page are OFF, the operatingfrequency appears on the Main Display.Note: Both Display mode and Full Duplex {page 91} cannot beactivated at the same time.1 Press [F] (1 s) to enter Menu A.2 Select the Display mode {page 22}.e The current Display status appears.HhgSdBiMeNUReZIINNxs3 Select your choice for the Display mode.e The available selections are OFF, Sub-display 1,and Sub-display 2.e Default: OFF4 Exit Menu A.If using more than 1 of the 3 functions (Tone/CTCSS,DTSS, Page), the function activated last will have itsparameter displayed when using Sub 1 or Sub 2 mode.ForexamplewhileusingSub2,ifToneisswitchedONfollowed byDTSS,the currentDTSScodewillappearontheMain Display andtheoperatingfrequencywillappearon theSub-display.The Tone frequency wouldnotbevisible.Todisplay theTone frequencyon theMainDisplay, disableTonethen re-enable Tone. This actioneffectivelymakes Tonethelastfunction selected. TheDTSScodewillnot bevisiblenow.65