11CHAPTER 2GETTING STARTEDOVERVIEWThis chapter tells you how to safely set up your printer andbegin printing right away. Included are instructions for• Selecting a location and unpacking• Checking printer contents and identifying printer parts• Installing the Belt Cartridge, Fuser Oil Bottle and FuserCleaning Roller, and Toner Modules• Loading the Paper Tray• Printing a Startup Page• Connecting the printer to your computer or network• Printing with the 4400 printer• Quick web printing with the 4400N network printer• Printing envelopes, transparencies, and labelsSAFETY INSTRUCTIONSTo protect yourself and your equipment from possibledamage, always follow these precautions.• Protect the printer from dampness or spills.• Save the printer box and all packing materials that camewith your printer in case you need to ship it later.• Lifting or moving the printer requires two adults!• Read the installation instructions carefully before youplug in your printer, and follow all warnings.• Keep this user’s guide handy for reference.• Keep the printer level at all times, especially when theFuser Oil Bottle is installed. Do not tilt more than 1.5°!• The fuser area, under the Top and Back Covers is veryhot. Let the printer cool at least 15 minutes beforetouching these areas.WARNING! This printer is intended to be electricallygrounded. It comes with a three-wire grounding plug. Thisplug will only fit a grounded AC outlet or power strip. Thisis a safety feature. Do not defeat the purpose of thegrounding plug by removing the third pin.SELECTING A LOCATIONSelect a level, stable place with adequate space for aircirculation and opening covers and trays. The area should bewell ventilated and away from direct sunlight or sources ofheat, cold, and humidity. Do not set the printer close to theedge of your desk or table!28”10”10”The printer and packaging weighs approximately 100 lbs.Moving and unpacking the printer requires two adults.Safety Precautions Keep printer ventsunobstructedFor more details on printerdimensions see Appendix A,“Printer Specifications.”
