NEC 4400 - SuperScript Color Laser Printer User Manual

Also see for SuperScript 4400: Network guide User guide

Contents

NEC 4400 - SuperScript Color Laser Printer User Manual Manual pdf 59 page image

51CHAPTER 5THE OPERATOR PANELOVERVIEWThe printer Operator Panel allows you to read printermessages and change printer settings directly at the printer.The diagram below identifies the different areas of theOperator Panel.This chapter describes• Operator Panel features, including indicator lights, themessage display, and buttons• Using the Operator Panel menu tree• Important tasks you perform using the Operator Paneland menu tree settings.OPERATOR PANEL FEATURESIndicator LightsThe indicator lights on the Operator Panel communicate theoperating status of the printer.Power Warning OnlineMenu OnLineData OHT LabelFeed Item MediaPrevious Next SelectLight Mode StatusPower On Printer power is on or in POWER SAVEmode.(Green) Off Printer power is off.Warning On Call for service (see page115).(Red) Off Normal state, no action is required.Blinking The printer has a problem. See themessage display. If there is nomessage, call for service (seepage115).Online On Printer is online and ready to print.(Green) Off Printer is offline or in menu mode.Blinking Printer is warming up.Data On Print buffer contains data.(Orange) Off Print job has ended or print buffer hasbeen cleared by pressing the Feedbutton.Blinking Data is being sent to the printer.OHT(Green)OnOffMedia type is set to Over HeadTransparency (OHT).Media type is not set to OHT.Label(Green)OnOffMedia type is set to Label.Media type is not set to Label.