Installing the Operating System with Express Setup 5-17[When PROSet is installed]1. The [Intel(R) PROSet] dialog box appears.* The procedure in the case of the standard start menuClick Start menu, point to [Control Panel], [administrative tools], and click[Computer Management] and then double click the [(Network Adapter Name)] in theNetwork Adapter list.* The procedure in the case of the classic start menu1. Click Start menu, point to [Settings] and click [Control Panel].2. Click [Administrative tools].3. Click [Computer Management] and double click the [(Network Adapter Name)] inthe Network Adapter list.2. Click the [Link] and specify the [Speed and Duplex] value the same as the value specifiedfor HUB.3. Click [Apply] and click [OK].Also, add or delete any protocols and services if necessary.You can operate the process on the property dialog box for local area network which can beappeared from [Network and Dial-up Connection].NOTE: We recommend you to add [Network Monitor] at[AddingServices]. [Network Monitor] can monitor the frame (or thepacket) that the computer installing [Network Monitor] sends orreceives. This tool is valuable when analyzing network trouble. Forinformation on how to install the tool, see the "Setting for SolvingProblems" described later in this chapter.
