4-28 Configuring Your ServerExitThe Exit menu appears if you move the cursor to "Exit."The options on the menu are described below.Exit Saving ChangesSelect this item to terminate SETUP after saving the newly selected information in CMOS(nonvolatile memory). Selecting "Exit Saving Changes" causes the confirmation screen to appear. Ifyou select "Yes," SETUP is terminated with the newly selected information saved in CMOS(nonvolatile memory). Then the server automatically reboots the system.Exit Discarding ChangesSelect this item to terminate SETUP without saving the newly selected information in CMOS(nonvolatile memory). Selecting "No" allows SETUP to be terminated without storage of themodified information. Then the server automatically reboots the system. Selecting "Yes" allowsSETUP to be terminated with storage of the modified information. Then the server automaticallyreboots the system.Load Setup DefaultsSelect this item to return all the values of SETUP to the default values. Selecting "Load SetupDefaults" causes the confirmation screen to appear. Select "Yes" to return the values to the defaultvalues. Select "No" to return to the Exit menu screen.
