4-2 Configuring Your ServerSYSTEM BIOS (BIOS SETUP UTILITY)The BIOS Setup utility is provided to make basic hardware configuration for the server. This utilityis pre-installed in the flash memory of the server and ready to run.The server is configured with the correct parameters using the BIOS Setup utility and shipped in thebest conditions. Thus, you don't need to use the BIOS Setup utility in most cases. However, youmight wish to use the BIOS Setup utility in the cases described below.IMPORTANT: The BIOS Setup utility is intended for system administrator useonly. The BIOS Setup utility allows you to set a password. The server isprovided with two levels of password: Supervisor and User. Withthe Supervisor password, you can view and change all systemparameters of the BIOS Setup utility. With the User password,system parameters available for viewing and changing are limited. Do not set any password before installing the OS. The server contains the latest version of the BIOS Setup utility.Dialog boxes appear on your BIOS Setup utility, thus, may differfrom descriptions in this manual. If you find anything unclear, seethe online help or ask your service representative.
