Configuring Your Server 4-13Memory ConfigurationThe following screen appears if you select "Memory Configuration" on the Advanced menu.See the table below for the items.Option Parameter Description Your SettingSystemMemory– Indicates the total capacity of the basememory. (View only)ExtendedMemory– Indicates the total capacity of the memoryavailable for OS. (View only)DIMM Group#1 - #6StatusNormalDisabledNot installedIndicates the current memory status. (Viewonly)"Normal" indicates that the memory devicesoperate normally."Disabled" indicates that one or more memorydevices are defected."Not Installed" indicates that no memorydevices are installed.On-screen group numbers and DIMM socketson mother board are associated as follows.Group #1: DIMM #1-1, #2-1Group #2: DIMM #3-1, #4-1Group #3: DIMM #1-2, #2-2Group #4: DIMM #3-2, #4-2Group #5: DIMM #1-3, #2-3Group #6: DIMM #3-3, #4-3Each group is composed of two DIMMs ofinterleave type.MemoryRetest[No]YesIf you select [Yes], BIOS will clear historicalmemory status and retest all the DIMMs onthe next boot. This parameter is automaticallyreset to "No" at the next boot.
