D-14 Installing Windows Server 2003 x64 EditionsNetwork DriverSpecify the details of network driver.One standard network driver that is mounted will be installed automatically, but the link speed andDuplex mode need to be specified manually.IP addresses is not able to set when the "Internet Protocol (TCP/IP)" check box OFF.This phenomenon will occur with the certain condition.Check ON the "Internet Protocol (TCP/IP)" check box and IP address will be able to set.[When PROSet is not installed]1. The [Local Area Connection Properties] dialog box appears.* The procedure in the case of the standard start menu1) Click Start menu, click [Control Panel], click [Network Connections], and click[Local Area Connection].* The procedure in the case of the classic start menu1) Click Start menu, click [Settings] and click [Network Connections].The [Network Connections] dialog box appears.2) Right-click [Local Area Connection] and click [Properties] from pop-up menu.2. Click [Configure].The property dialog box for network adapter appears.3. Click the [Advanced] and specify the [Link Speed & Duplex] value the same as the valuespecified for HUB.4. Click [OK] on the property dialog box for network adapter.
