Setting Up Your Server 3-5When you have selected a server site, hold the server by its bottom with at least three persons andcarry it to the site, then place it slowly and gently.IMPORTANT: Do not hold the server by its front door to lift the server. The frontdoor may be disengaged and damage the server. Open the stabilizers and secure the server to the site. Do not hold the handle on the power module when carrying theserver.Do not place the server in the following places. Placing the server in such places may causemalfunctions of the server. Places with drastic changes in temperature (e.g., near a heater, air conditioner, orrefrigerator) Places with strong vibration Places with corrosive gas in presence, near chemicals, or with possibilities of chemicalssprayed over On a non-antistatic carpet Places with possibilities of falling objects Places where a power outlet that shares the ground line with another (especially the one towhich a device with large power consumption is connected) must be used for the server Do not install the server near equipment that generates power noise (e.g., contact spark atpower-on/power-off of commercial power supply through a relay). (To install the servernear equipment that generates power noise, ask your sales agent for separating the powerwiring or installing a noise filter.)
