9-38 Upgrading Your ServerList of optional devices and their available slotsProduct name PCI-X#1PCI#2PCIe#3PCIe#4PCIe#5PCI slot capability*1 64 bit/100MHz32 bit/32MHz x8 laneSlot size Full-heightPCI board type*1 3.3V 5V x8 socketN codeAvailable board size Long/shortNoteN8103-95 SCSI controller(64-bit/66MHz PCI) √ √ – – – Cannot connect with internalhard disk drive.N8103-75 SCSI controller(64-bit/133MHz PCI-X) √ √ – – – Cannot connect with internalhard disk drive.N8103-126 SCSI controller(64-bit/133MHz PCI-X) √ √ – – –2 max.Cannot connect with internalhard disk drive.For connection with SATAdisk arrayN8103-91Disk array controller foronboard SAS(PCI EXPRESS (x4))– – √ √ √ 1 max.3 max. with N8103-90/80/81N8103-90Disk array controller forexternal SAS(PCI EXPRESS (x4))– – √ √ √3 max.Cannot connect with internalhard disk drive.3 max. with N8103-80/81/91N8103-80 Disk array controller (1 ch)(64-bit/66MHz PCI) √ √ – – –Cannot connect with internalhard disk drive.3 max. with N8103-91/90/81N8103-99 Disk array controller (0 ch)(64-bit/133MHz PCI-X) √ – – – – 1 max.N8103-81 Disk array controller (2 ch)(64-bit/66MHz PCI) √ √ – – –Cannot connect with internalhard disk drive.3 max. with N8103-91/90/80N8104-111 100BASE-TX adapter(32-bit/33MHz PCI) √ √ – – – 2 max.N8104-86 100BASE-TX adapter(32-bit/33MHz PCI) √ √ – – – 2 max.N8104-119 1000BASE-T adapter(64-bit/133MHz PCI-X) √ √ – – –N8104-120 1000BASE-T adapter (2 ch)(64-bit/133MHz PCI-X) √ √ – – –Cannot co-exist with N8104-112.N8104-114 1000BASE-T adapter(PCI EXPRESS (x1)) – – √ √ √ Teaming with another N8104-114 is allowed.N8104-121 1000BASE-T adapter (2ch)(PCI EXPRESS (x4)) – – √ √ √ 2 max.N8104-112 1000BASE-SX adapter (2ch)(64-bit/133MHz PCI-X) √ √ – – –1 max. per PCI bus (2 max.per PCI bus with AFT)Cannot co-exist with N8104-103/113.√: Available, –: UnavailableOnboard LAN Controller ConsiderationsIt is possible to configure the Teaming function of AFT (Adapter Fault Tolerance)/ALB (AdaptiveLoad Balancing) in a standard network controllers (on board LAN controllers). But it is impossibleto configure the Teaming function of the same AFT/ALB on a standard network controller and anoptional LAN board.
