3-4 Setting Up Your ServerSELECTING SERVER SITERead the following precautions before selecting a suitable site for your server. The followingdescribes installation of the server and connections to the server.CAUTIONObserve the following instructions to use the server safely. Failure to followthese instructions may cause a fire, personal injury, or property damage. Seepages 1-3 to 1-8 for details.■ Never attempt to lift the server with two or less persons.■ Do not install the server in any place other than specified.■ Do not use the server in a place with corrosive gas in presence.The following figure illustrates a site suitable for installing the server.* It is recommended that theserver should be used in aroom where temperature is inthe range between 15 to 25ºC.Close enough to connectthe mouse and the display.Install the server on thefloor or rigid, flat desk.Open the stabilizersto secure the server.Place having a space enough to fullyopen the front door (The front doorextrudes about 35 mm from the leftside of the server when fully opened.)Room that satisfies the following conditions: * Temperature: 10 to 35ºC 5 to 40ºCHumidity: 20 to 80% 10 to 80%Temperature gradient: ±10ºC/h ±15ºC/hAtmosphere (hpa): 749 to 1040 749 to 1040 hpa100 to 120 Vac/200 to240 Vac parallel bi-polar wall power outletwith the ground line.Wall outlet toconnect thesupplied powercord.UPS to prevent momentaryvoltage drop due to powerfailure or lightning ** Optional. UPS isrecommended for bestuse of features of server.Allow clearance of atleast 150 mm in front ofand rear of the server.
