Installing Windows Server 2003 E-13Network DriverSpecify the details of network driver.One standard network driver that is mounted will be installed automatically, but the link speed andDuplex mode need to be specified manually.[When PROSet is not installed]1. The [Local Area Connection Properties] dialog box appears.* The procedure in the case of the standard start menu1. Click Start menu, Click [Control Panel], Click [Network Connections], and Click[Local Area Connection].* The procedure in the case of the classic start menu1. Click Start menu, Click [Settings] and Click [Network Connections].The [Network Connections] dialog box appears.2. Right-click [Local Area Connection] and click [Properties] from pop-up menu.2. Click [Configure].The property dialog box for network adapter appears.3. Click the [Advanced] and specify the [Link Speed & Duplex] value the same as the valuespecified for HUB.4. Click [OK] on the property dialog box for network adapter.[When PROSet is installed]1. The [Intel(R) PROSet] dialog box appears.* The procedure in the case of the standard start menuClick Start menu, point to [Control Panel], [administrative tools], and click[Computer Management] and then double click the [(Network Adapter Name)] in theNetwork Adapter list.* The procedure in the case of the classic start menu1. Click Start menu, point to [Settings] and click [Control Panel].2. Click [administrative tools].3. Click [Computer Management] and double click the [(Network Adapter Name)] inthe Network Adapter list.2. Click the [Link] and specify the [Speed and Duplex] value the same as the value specifiedfor HUB.3. Click [Apply] and click [OK].
