Configuring Your Server 4-19SCSI BIOS (SCSISelect)The SCSISelect utility is provided to configure the SCSI controller on the mother board (or theSCSI controller on an optional board). This utility may be started with a simple key operationwhile POST is in progress and requires no specific start-up disk.Using SCSISelect UtilityUse the SCSISelect utility mainly to set the transfer speed of connected SCSI devices or toconfigure the internal hard disk drives connected to the onboard SCSI controller as a RAID drive(HostRAID). The SCSI devices include those installed in the backup file bay, such as an externalDAT and MO, but not hard disks.IMPORTANT: SCSI configuration must be made on a per-SCSIcontroller basis with a utility. The server contains one SCSI controller.When you added optional SCSI controllers, you need to makeconfiguration for each SCSI controller in addition to the standardinternal SCSI controller. Some additional SCSI controllers mayrequire a different utility to make changes to the configuration.Configuring SCSI Controller on Mother BoardThe following describes configuration for the SCSI controller on the mother board of the server.
