9-22 Upgrading Your ServerDIMMInstall the additional DIMM (Dual Inline Memory Module) to the DIMM socket on the motherboard in the server. The mother board is provided with six DIMM board slots.NOTE: Up to 12GB of memory (2GB DIMM x 6) can be installed.(The DIMMs installed as standard need to be replaced in this case.)Two DIMMs of 512MB are installed in DIMM slots #5 and #6 atshipment.IMPORTANT: The DIMM is extremely sensitive to static electricity. Make sure totouch the metal frame of the server to discharge static electricityfrom your body before handling the DIMM. Do not touch theDIMM terminals or on-board parts by a bare hand or place theDIMM directly on the desk. For static notes, see the section "Anti-static Measures" described earlier. Make sure to use the DIMM authorized by NEC. Installing a third-party DIMM may cause a failure of the DIMM as well as the server.Repair of the server due to failures or damage resulted frominstalling such a board will be charged.
