3-10 Setting Up Your ServerInstalling the Rail AssembliesMake sure of the right side rail assembly or the left one when installing it. See the figure below.1. Loosen a screw securing the rail assembly.2. Align the front and rear frames of rail assembly to the location where the core nuts areinstalled.Locate the rail assembly so that the frame of the rack is located between core nuts andframes of rail assembly.NOTE: Confirm that the portion of the frame to fix the rail assembly islocated in front of the rack frame.3. Firmly secure the rail assembly (one screw for the front of a rail, two screws for the rearof a rail).Front RearLeft side rail assemblyRight side rail assemblyScrews
