D-14 Installing Windows Server 2003NOTE: We recommend you to add [Network Monitor] at[AddingServices]. [Network Monitor] can monitor the frame (or thepacket) that the computer installing [Network Monitor] sends orreceives. This tool is valuable when analyzing network trouble. Forinformation on how to install the tool, see the "Setup forTroubleProcess" later in this document.Re-install the Network DriverThe network driver will be installed automatically.Graphics Accelerator DriverUpdate Graphics Accelerator Driver Mounted in Standard.1. Insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive.2. Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer]3. Run "SETUP.EXE" in the following directory.:\WINNT\VIDEO\RADEON7000\W2K3\SETUP.EXE* Install the graphics accelerator driver in the following directory if you communicateyour server with the remote KVM console. (Optional advanced remote managementcard (N8115-02) must be installed in your server to use the remote KVM console.):\N8115-02\VIDEO\RADEON7000\SETUP.EXE4. Follow the message to continue the installation.5. Remove the NEC EXPRESSBUILDER CD-ROM from the CD-ROM drive, follow thedirection on the screen and restart the system.SETTING FOR COLLECTING MEMORY DUMP(DEBUG INFORMATION)Set for collecting memory dump using the procedure described in Chapter 5.
